FULL PRODUCT DESCRIPTION
Top-Tec T-T485-U-1 universal TFT bracket
Top-Tec T-T 485-U-1 universal flat screen security device with tilt only, offers a high resistance against theft. Dimensions 370w x 295 x 180h. 4.80kg.
Security bracket is suitable for most flat screens with 75mm or 100mm fixings on the rear, which includes a truly universal approach when renewing your flat panel monitors in future. Also, the unit provides built-in protection for a keyboard and mouse, whilst the security cover of the baseplate can also act as a safeguard for smaller valuables such as mobile phones and keys.
Approximate dimensions, width as TFT, dept 214, height TFT plus 287cm
Picture shows the T-T 485-U-3 model for illustration only. Does not include keyboard mouse or monitor.
The bracket is secured by two steel straps, supplied with the unit, when bolted through the work surface.
Once installed, the flexible design will allow the setting of the optimum height, swivel and tilt adjustment. This means the monitor can be set for individual users and can be titled to avoid glare.
Features of T-T 485 range
T-T 485 U 4 has height swivel, tilt and adjustable focal length
T-T 485 U 3 has height swivel and tilt
T-T 485 U 2 has swivel and tilt
T-T 485 U1 has tilt only
Top-Tec range of security products
Top-Tec AV and computer security devices, manufactured by Dalen in the UK, reflect the highest possible standard in physical equipment protection. They have the widest range of LPS 1214 category 1 and II approved computer security devices, are accredited by Secured by Deisgn, BSIA member, BESA member and products are manufactured to ISO 9001-2000 standard.
Individual products that have been LPCB approved will include that fact in the product description.
General note
The security of their units rely on the correct use of suitable fixings. In order to achieve the maximum security level, they advise you check the condition and building materials of walls and floors before installation.
Dalen offer a nationwide fitting service (extra cost) for most of their products. When installing, Dalen does not carry out structural surveys and can therefore not guarantee the strength of the wall and floor fixings.
Please note Top-Tec generally work on 80kg max load for their brackets but it all depends on what fixings you are using, the wall or ceiling struction, etc., so this is a very general guideline. We have therefore listed the max weight at 45kg to err on the side of caution. However, Top-Tec nor Wedgwood take no responsibility for damage to your equipment caused by any reason whatsoever, and recommend you use a competent installation company who can advise on your installation requirements.
|