FULL PRODUCT DESCRIPTION
Top-Tec T-T140/5 projector cage
Top-Tec universal projector cage (not LPCB approved). Can be desk mounted or ceiling mounted (for ceiling mounted you need existing or new 2-inch diameter pole and ceiling plate, extra cost). For projectors up to 388 x 303 x 145mm. Dimensions 470w x 405 x 205h. 19.82kg.
Picture shows the cage desk mounted and ceiling mounted (ceiling poles are not included).
Features
Universal design accommodates most smaller projectors
Can be ceiling mounted (needs 2-inch diameter pole, not supplied)
Can be desk mounted
Effective obstacle and deterrent to theft
Movable panels allow the unimpeded use of the projector
High quality finish
Please note ceiling mounted units require a 2-inch diameter pole (not supplied) with a minimum usable length of 75mm. Weight of this cage is approx 15.0kg excluding your projector.
Top-Tec cages
Top-Tec cages; two of which are LPCB approved and two of which are not:
T-T140/3 LPCB approved cage for projectors up to 340 x 255 x 95mm
T-T140/4 LPCB approved cage for projectors up to 340 x 255 x 120mm
T-T140/5 cage for projectors up to 388 x 303 x 145mm
T-T140/6 cage for projectors up to 436 x 351 x 170mm
LPCB approved universal projector cages are the only AV security devices in the UK to be attack tested to Loss Prevention Certification Board standards. Designed to LPS1214 standards with flexibility in mind, cages are available in four sizes. Security enclosures have fully adjustable side and base plates to accommodate the massive variation in projector design. Lens position, cooling fans, filters, control panels and connectors can all be catered for with our versatile adjustable plates. A fully certified system is achieved when fitted in conjunction with our LPCB approved poles and lockable ceiling unit.
Adjusting the projected image, particularly on to an interactive white board, is also catered for using the unique Top-Tec ball swivel system, providing tilt in all directions together with 360º rotation capability. The unit is designed to work with other 2"/50mm ceiling mounted devices. Please note: The maximum carrying capacity of the ceiling mounting is dependent on the integrity of the fixings used and the structure to which it is attached.
Please note Top-Tec generally work on 80kg max load for their brackets but it all depends on what fixings you are using, the wall or ceiling struction, etc., so this is a very general guideline. We have therefore listed the max weight at 45kg to err on the side of caution. However, Top-Tec nor Wedgwood take no responsibility for damage to your equipment caused by any reason whatsoever, and recommend you use a competent installation company who can advise on your installation requirements.
|