FULL PRODUCT DESCRIPTION
Top-Tec T-T105-SC150 security chain for 1500mm pole
Security chain for Top-Tec 1500mm column pole (extra), to help prevent cutting. The security chain feeds through the cable port of a CP1, down the inside of the pole and are terminated with the secure safety bolt in the security cage or projector attachment.
Picture shows a heavy duty pole (105-HDC050 50cm long) and also illustrates the security chain (105-SC50). Pole and chain are sold as separate items.
Top-Tec range of non-security and security ceiling plates, poles and projector cages
Top-Tec series of ceiling mounts and heavy duty poles offer a very strong support for your projector. To help prevent the cutting of a pole a security chain can be supplied. They also provide ceiling plate security, protecting the ceiling bracket from being unbolted.
The universal joint bracket is designed to help prevent the pole and the ceiling plate from being torn-out by a thief. When a side force is applied to the cage/pole the whole assembly moves instead of breaking. All items are suitable to retro-fit to a 50mm round pole system. Heavy duty material is used, finished in black/zinc.
Maximum carrying capacity of the ceiling fixing plate is entirely dependent on the integrity of the fixings used and the structure to which it is attached.
Examples of T-T105 ceiling plates and poles
Ceiling plate, ceiling locks, heavy duty pole, standard duty pole, security chain, universal joint for pole, pair of locks for universal joint, single lock for pole.
No security - CP1 standard ceiling plate, HDC050 500mm long heavy duty pole
Medium security - CP1 standard ceiling plate, CPLOCK pair of ceiling locks, HDC050 500mm long heavy duty pole, SC050 security chain for 500mm pole
High security - CPI standard ceiling plate, CPLOCK pair of ceiling locks, UJ universal joint for pole, UJBSC pair of locks for universal joint, HDC050 500mm long heavy duty pole, SC050 security chain for 500mm pole
Top-Tec range of security products
Top-Tec AV and computer security devices, manufactured by Dalen in the UK, reflect the highest possible standard in physical equipment protection. They have the widest range of LPS 1214 category 1 and II approved computer security devices, are accredited by Secured by Design, BSIA member, BESA member and products are manufactured to ISO 9001-2000 standard.
Individual products that have been LPCB approved will include that fact in the product description.
General note
The security of their units rely on the correct use of suitable fixings.
Dalen offer a nationwide fitting service (extra cost) for most of their products. When installing, Dalen does not carry out structural surveys and can therefore not guarantee the strength of the wall and floor fixings.
Please note Top-Tec generally work on 80kg max load for their brackets but it all depends on what fixings you are using, the wall or ceiling struction, etc., so this is a very general guideline. We have therefore listed the max weight at 45kg to err on the side of caution. However, Top-Tec nor Wedgwood take no responsibility for damage to your equipment caused by any reason whatsoever, and recommend you use a competent installation company who can advise on your installation requirements.
|