FULL PRODUCT DESCRIPTION
TOA F-2852C ceiling speaker
Toa F-2852C ceiling speaker has been designed to overcome limiting factors that are associated with conventional ceiling mounted speakers. 100V line, 60W, NOT fire compliant.
TOA's new ceiling speaker range provides well-balanced audio reproduction without treble attenuation over an expanded listening area thanks to the extra-wide dispersion characteristics that are part of the overall speaker design. Perceived speaker directionality and beaming tendencies are minimized, resulting in a natural, well-balanced sound over a wide area at all levels.
Features
Designed to blend into ceilings with a smooth, low-profile design.
Extra ease of use and higher cost-effectiveness with the metal "back can" enclosure for the speaker rear.
Minimal high frequency roll-off allows clear and well-balanced sound reproduction over a wide listening area.
Quick and easy installation to precisely mount speaker onto ceilings and walls. Rotating front grille also installs quickly and conveniently.
The Electronic Controller (AC-120) option is required to provide increased control of the F-122C's speaker response.
Specification
Enclosure Bass reflex type
Rated Input 60W (high impedance)
Power Handling Capacity Continuous pink noise: 90W(8ohm), 60W (16ohm)
Continuous program: 180W(8ohm), 120W(16ohm)
Impedance (100V Line) 170ohm (60W), 330ohm (30W) 670ohm (15W), 3.3kohm (3W)
Impedance (70V Line) 83ohm (60W),170ohm (30W) 330ohm (15W), 670ohm (7.5W) 3.3kohm (1.5W)
Impedance (25V Line) 83ohm (7.5W),170ohm (3.7W) 330ohm (1.9W), 670ohm (0.9W) 3.3kohm (0.2W)
Low (Adjustable 16ohm, 8ohm
Sound Pressure Level 91dB(1W, 1m)
Frequency Response 60 - 20,000Hz (-10dB), 45 - 20,000Hz (-20dB) at installation in 1/2 free sound field (measured by installing the unit in the center of a ceiling.)
Speaker Component High frequency: Dome- type
Speaker Component Low frequency: 16cm cone-type
Mounting Hole ø250(maximum ceiling thickness: 37mm)
Input Terminal Removable locking connector with screw-down terminals (2 input terminals and 2 bridge terminals)
Usable Cable Solid copper wire: ø0.5 - ø1.6mm (equivalent to AWG No. 24 - 14) Stranded copper wire: 0.2 - 2.5mm (equivalent to AWG No. 24 - 14)
Finish Enclosure Steel plate, plating
Baffle Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), black
Rim Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), white, paint
Punched net Steel plate, white, paint
Dust-proof bag n/a
Dimensions ø280 x 227 (D)mm
Weight 5.1kg (including mounting accessories)
Accessories Panel 1
Ceiling reinforcement ring 1
Safety wire 1
Paper pattern 1
Option Anchor hanging bracket HY- AH1
Back can n/a
Tile bar bridge HY- TB1
Trim ring n/a
Electronic controller n/a
|