Sony SNC-DF40P mini-fixed network dome camera

Sony SNC-DF40P

Sony Ipela SNC-DF40P easy to install, integral dome enclosure, network camera, supports audio transmission from either its own in-built microphone or an external line input, and the in-built vari-focal lens provides optimum coverage over any desired area.

SNC-DF40P is equipped with a built-in motion detection function that can generate an alarm through its alarm-output port or trigger another device to perform a variety of actions. The motion detection function uses vector information to detect motion so that unwanted noise components do not accidentally trigger the alarm. It is also equipped with a sensor-input port that can receive a trigger from an external sensor.

With a built-in buffer memory, the SNC-DF Series can store several seconds of pre-alarm and post-alarm still images when the motion detection function, the alarm input or both trigger an alarm. All of the pre-/post-alarm images stored at the time of an alarm event can be transferred to an FTP server for later viewing. In addition, the still image captured at the time of an alarm event can be sent to a designated e-mail address

SNC-DF40P offers a choice of three different power supplies. AC 24 V or DC 12 V can be supplied through the standard power terminal while Power-over-Ethernet simplifies installation by reducing the need for additional cables for power.

Sony SNC-DF series is equipped with an analogue composite video output, allowing camera images to be directly recorded or monitored by connecting video equipment such as time-lapse recorders, hard disk recorders, and monitors.

Features

JPEG / MPEG-4 network colour dome video camera with integral dome enclosure
Built in CS mount, auto iris vari-focal lens (f=3 to 8mm from F1.0) for optimised coverage of any viewing area
Multicasting capability supported and Adaptive Rate Control for stable image transmission
Half duplex audio through built in or external microphone input and audio line out
Built in motion vector activity detection permits unattended operation
PAL composite video output for local analogue viewing or recording

Specification

General: Mass Approx. 1,500 g (3 lb 5 oz)
Dimensions 165 x 135 x 166 mm (6 1/2 x 5 3/8 x 6 5/8 inches)
Power requirements AC 24 V 50/60 Hz, DC 12 V,POE
Power consumption 8.0 W
Operating temperature -10 to +50 ºC (14 to 122 ºF)
Storage temperature -20 to +60 ºC (-4 to +140 ºF)
Operating humidity 20 to 80%, non-condensing
Storage humidity 20 to 95%, non-condensing
Cables are NOT included

FREE AV Guide - Click to download

Tel 01754 898900 | Fax 01754 898910 | Email