Panasonic WV-CL920A 240V colour mono camera

Panasonic WV-CL920A low light surveillance camera

Panasonic WV-CL920A surveillance camera is equipped with both colour and B/W modes automatically, or manually. When combined with an infrared light source, these cameras, in their B/W mode, can be used in extremely low light conditions making it ideal for highway, tunnel, car parks and town centre surveillance.

The WV-CL920 series cameras switch automatically from colour, for daytime use, to ultra-sensitive B/W for night time surveillance.
Minimum light intensity for colour mode is 0.3 lx at F1.4, and 0.02 lx at F1.4 for the B/W mode. With a sensitivity enhancement of up to 32x at automatic mode, full colour surveillance in light as low as 0.01 lx can be obtained.

Please note Panasonic standard range of surveillance cameras, with the exception of the WVCW370, come as the camera body only, and need a lens, housing, power supply and bracketry (all these items are extra cost). These cameras will also need installation and this service can be ordered at extra cost, when you order your cameras, or you may prefer to choose your own local installation company. These cameras run a coaxal cable which is not supplied.

Features

1/2" type Interline Transfer CCD
Switches from selected colour mode to B/W Mode
Super sensitive of 0.3lx at F1.4 in colour mode
480-line Horizontal resolution in colour mode
ELC Function enables use of fixed iris lens (lens is extra)
Built-in Digital Signal Processing LSI's
Built-in Digital Motion Detector
Built-in 16 Alpha-numeric Character Display
Electronic Sensitivity Enhancement (Auto/Manual/Off)
Electronic Shutter
VD2 Sync Capability with Panasonic System Products
Gen-lock Capability

Specification

Pick-up device: 762 (H) x 582 (V) pixels, Interline Transfer CCD
Scanning area: 6.45 (H) x 4.84 (V) mm (Equivalent to 1/2 Tube)
Scanning: 625 lines/50 fields/25 frames
Scanning system: 2:1 Interlace
Synchronization: Internal, Line-locked, External (VBS/VS), or Multiplexed VD2 Selectable
Video output: VBS 1.0 [p-p] / BNC Connector
Horizontal resolution: 480-line at Colour mode, or 570-line at B/W mode
Minimum Illumination: 0.3 lx at F1.4 (Colour mode), or 0.02 lx at F1.4 (B/W mode)
S/N Ratio: 50dB at AGC off
Character display: 16 Alphanumeric characters
Motion detector: On/Off selectable
Electronic Sensitivity Up: Off, Auto
Electronic Light Control
Equivalent to continuous variable shutter speed
Power Source: 220V - 240V ac, 50Hz
Power consumption: 5.1W
Dimensions: 74 x 65 x120mm
Weight: 450g (without cables)

Please note Panasonic offer a choice of voltages for UK installations depending what power supply is available on site, or what preference you have if were to put your own supply in.

WV-CL920A is 240volt AC and the WV-CL924A is the 12/24 volt version of the WV-CL920A camera.

Panasonic example of a basic system

An example is to connect the WJ-HD316 (16 camera inputs) or WJ-HD309 (9 camera inputs) to CD-R/DVD-R, VTR (video Y/C output), two dome cameras WV-CS850B on ch1-8, WV-CP250x8 on ch9-16, colour monitor x 2 (live and live/playback/menue), connected to recorder on video output, RGB monitor for live playback/menue, on RGB output, connected Ethernet (10Base-T100Base TX) to LAN/WAN, via Internet to PC and PC/laptop. Cascade system involves up to 64 camera inputs.

Our Panasonic technical expert is happy to put together a CCTV system to suit your needs and give you a quote for equipment and installation, please call for assistance.

FREE AV Guide - Click to download

Tel 01754 898900 | Fax 01754 898910 | Email