FULL PRODUCT DESCRIPTION
Neo-Neon Elysium LED IP67 path light - blue
Elysium ELY-LV-IP67-RGB, 24V 165mm diameter, IP67 weather resistant LED path light, bevel edge in flush glass. Designed for all-weather, ground level operation the pathlight is DMX or SRC-171 controlled for colour changing. Controller sold separately. You can control up to 24 pathlights with one controller. Bevel edge flush glass, 24v, RGB.
Picture shows 3 LED pathlights, in the colour range RGB; a pathlight in the ground and a sketch of the SRC-171 controller with the pathlights cabled together. All items sold separately.
Low maintenance, it has a pallet of 16.7 million colours for a range of applications including parks, walkways, nightclubs and garden areas.
Specification
Colour resolution: 24bit RGB
Colour range: 16.7 million colours at 24bit RGB additive colour mixing
LED lamp source: High intensity SMD LEDs - RGB
Optical angle: 30 degrees
Connector: 4 pin cable output with individual clip at each wires end
Data connector: DMX512
Controller: Stand alone SRC171 or in unison with DMX512
Automatic colour change: Press Function button to enter Automatic mode
Voltage: 24VDC
Power consumption: 2.88W
Power equipment: Built-in switch power inside SRC controller
Protection: IP67
Operating temperature: -20 degree C to 40 degree C
LED approx lifetime: 100,000 hours
Elysium range of LED path lights
Neo-Neon Elysium LED path lights come in a choice of colours, red, blue, green, white or yellow, voltage of 12V, 24V or 240V, and size 60mm or 90mm, either bevel edge with convex glass or flush glass, or straight edge with flush glass. Also in the range are 220mm diameter path lights in single colours of blue, green, red, white or yellow and RGB for colour changing, or two choices in 165mm size, bevel edge flush glass 24V RGB or 165mm blue LED pathlight.
Single colour LED path lights need power source and it depends on how many lights you need and the total amount of wattage as to which PSU (power supply unit) you will need. For the RGB (red, green, blue) LED lights you will also need the EO-SRC-171 controller in order to change colours.
LED lights can be daisy chained together with suitable cabling which your electrician can normally supply for you.
|