Communication Technology DPS402 paging mic

DPS402 single zone paging microphone system

Communication Technology DPS402 single zone, simple paging microphone, operates as a normal 'live' paging microphone, the paging announcement is made and stored for broadcast. The delay between paging completion and broadcast is internally pre-set on installation to 5, 15, 30 or 60 seconds.

DPS402 incorporates Store'n'Forward technology to beat acoustic feedback problems, with automatic self-cancelled repeat.

Features of DPS 402 single zone paging microphone

Operating as a normal ‘live’ paging microphone, the paging announcement is made and stored for broadcast. The delay between paging completion and broadcast is internally pre-set on installation to 5, 15, 30 or 60 seconds.

Announcements may be pre-set on installation to be automatically repeated once, twice, three or four times, after which they are self cancelled.

Announcements can be up to 2 minutes in duration.

An announcement can be manually cancelled at any time, including during the original recording, if an error is made or the operator is interrupted.

An internal chime can be selected to pre-announce any messages. Alternatively, any pre-announcement chime already included in the host system can be triggered by DPS 402; the announcement is automatically paused until the chime sequence is completed.

DPS 402 works with electronic or VOX accessed amplifiers. The microphone output can be at ‘normal’ or line level by ‘D’ pin selection.

If the host system is multi-tasked – various inputs – and is equipped with ‘system busy’ outputs, DPS 402 will not broadcast whilst the system is in another use; if a priority use activates during a DPS 402 announcement this will override the announcement which will recommence from its beginning after priority use ceases.

DPS400 series of paging microphones

Store 'n' Forward technology is a real step forward for paging in busy environments or for broadcasting repeating announcements for example, in foodstores and transport termini.

Using the same housings as the standard DPM range, the DPS400 Series present no visible challenge to the operator. Because any 'live' announcement is time delayed before being broadcast, acoustic feedback is eliminated. The Paging Microphone is available in two basic versions:

DPS400: With Message StoreCompletely self-contained, DPS400 can directly replace existing desk paging microphones with these key additional features:a) enables paging announcements to be made without acoustic feedback, as DPS402.b) Independent from a) to record and store up to 3 promotional messages and to automatically repeat them at selected time intervals until manually cancelled.

DPS402: A simple paging microphone incorporating Store'n'Forward technology to beat acoustic feedback problems, with automatic self-cancelled repeat.
Announcements may be pre-set on installation to be automatically repeated one, two, three or four times, after which they are self-cancelled.
Announcements can be up to 2 minutes in duration
An announcement can be manually cancelled at any time, including during the original recording, if an error is made or the operator is interrupted.
An internal chime can be selected to pre-announce any messages. Alternatively, any pre-announcement chime already included in the host system can be triggered by DPS402; the announcement is automatically paused until the chime equence is completed.
DPS402 works with electronic or VOX accessed amplifiers. The microphone output can be at 'normal' or line levelby 'D' pin selection.
If the host system is multi-tasked - various inputs - and is equipped with 'system busy' outputs, DPS402 will not broadcast whilst the system is in another use; if a priority use activates during a DPS402 announcement this will override the announcement which will recommence from its beginning after priority use ceases.

Specification DPS402

Audio Output 775mV, 600 Ohms Source 5mV, 600 Ohm Source
DC Powering 24V DC @ 100mA
Interface 15 way 'D' male
Interface DC Supply 2.5mm DC power socket, also available on 15 way connector
Frequency Response 200Hz ~ 6KHz
Access Out Port Dry contact closure when DPS wishes to access host system
Busy In Port If active will not allow DPS to access host system
Pause for Chime Port 4 seconds to allow for host system chime; selectable option to in-built chime
Activity Display Port By 'hi-bright' LEDs
Facilities Store'n'Forward of a paging announcement up to 2 mins duration.
REPEAT FREQUENCY : 1,2,3,4 times
REPEAT DELAY : 5,15,30,60 seconds, PRESET ON INSTALLATION
Base 170(D) x 130(W) x 50(H) mm
Gooseneck 260mm length to capsule
Weight 900g
Desk Top Brushed stainless steel
Desk Base Satin black powder coat
Gooseneck/Microphone Matt black

FREE AV Guide - Click to download

Tel 01754 898900 | Fax 01754 898910 | Email