Communication Technology C98 paging mic

C98 light duty gooseneck microphone

Communication Technology C98 dynamic microphone with 295mm flexible gooseneck, terminates via M10 thread. Capsules are mounted in a computer-matched acoustic chamber fitted with an 'anti pop' blast screen. A stainless steel mesh protects the capsule from physical damage. Needs base, sold separately.

A noise cancelling, moving coil only option is also available.

C98 series of light duty paging gooseneck microphones

A range of paging microphones designed for use where voice clarity is an essential requirement and offering both moving coil and electret capsules fitted to fully flexible or rigid goosenecks. In addition, the microphone head only is available for free mounting or suspension.

C98 series features

Moving Coil Capsule: With a polar diagram approximating to cardioid, the capsule has a substantially flat frequency response with an added 'presence' lift at 3KHz.

Electret Capsule: The polar diagram is unidirectional in characteristic and the frequency response extends beyond the speech band. The internal FET pre-amplifier requires a small DC voltage to operate.

Mounting Methods: A variety of other mechanical means of mounting can be offered as alternatives to the standard 10mm diameter threaded bush. For example, mating with 3 PIN XLR sockets, or flange mount.

Order Codes:
• C98 Moving coil microphone fitted to fully flexible 295mm gooseneck terminated with M10 mounting base/nuts/washer.
• C98/XLR Moving coil microphone fitted to fully flexible 295mm gooseneck terminated with 3 pin male XLR connector.
• C98/LEC Moving coil microphone fitted to fully flexible 280mm gooseneck and 120mm solid tube terminated with 3 pin male XLR.
• BS100 ‘Superblast’™ for close speech protection. Fits over head of C98 series and all Buddy and DPM Series.

For electret versions (/E) contact the sales office for further details.

C98 Series Features
Moving Coil Capsule:
With a polar diagram approximating to cardioid, the capsule has a substantially flat frequency response with an added 'presence' lift at 3KHz.

Electret Capsule:
The polar diagram is unidirectional in characteristic and the frequency response extends beyond the speech band. The internal FET pre-amplifier requires a small DC voltage to operate.

Mounting Methods:
A variety of other mechanical means of mounting can be offered as alternatives to the standard 10mm diameter threaded bush. For example, mating with 3 PIN XLR sockets, or flange mount.

Order Codes:
• C98 Moving coil microphone fitted to fully flexible 295mm gooseneck terminated with M10 mounting base/nuts/washer.
• C98/XLR Moving coil microphone fitted to fully flexible 295mm gooseneck terminated with 3 pin male XLR connector.
• C98/LEC Moving coil microphone fitted to fully flexible 280mm gooseneck and 120mm solid tube terminated with 3 pin male XLR.
• BS100 ‘Superblast’™ for close speech protection. Fits over head of C98 series and all Buddy and DPM Series.
For electret versions (/E) contact the sales office for further details.

Mounting Options for the C98 Series:
• /UMC Circular mounting base, three hole fixing to fix to horizontal or vertical flat surface.
• /UBC Block mounting base, two hole fixing to fix to horizontal or vertical flat surface

C98 series specifications

Capsule Type Moving Coil Dynamic
Impedance @ KHz 600 Ohms Floating
Polar Characteristics Cardioid, approx (noise cancelling option available)
Frequency Response (±6DB Limits) 100Hz ~ 8Hz Presence lift at 3KHz
Polarizing voltage - not applicable
Sensitivity -72DB (suitable for amplifier inputs of 500uV or less)

C98/E (electret) series specifications

Capsule Type Electret
Impedance @ KHz 600 Ohms Unbalanced
Polar Characteristics Unidirectional
Frequency Response 100Hz ~ 15KHz
Polarizing Voltage 4.5V ~ 9V DC from host amplifier, or related source
Sensitivity 68DB (suitable for amplifier inputs of 500uV or less)

FREE AV Guide - Click to download

Tel 01754 898900 | Fax 01754 898910 | Email