Category

All products (13760) > Audio products (963) > Boundary microphones (19) > Communication Technology boundary microphones (4)

Communication Technology C200/PTTmic in white


Colour	White
Additional features	On/off switch
Warranty (UK)	1 year RTB warranty
Price ex. VAT	£150
Delivery ex. VAT per order	£15
Price including VAT and del.	£193.87
Availability	2-3 work days

Please note that Independent Products only supply products to businesses, government
bodies, educational establishments and charities. We do not sell to private individuals.

FULL PRODUCT DESCRIPTION

C200/PTT boundary microphone in white

Communication Technology C200/PTT boundary microphone, with ON/OFF switch, is designed for use in applicable high quality sound systems for conferences, stage sound reinforcement, ambient noise monitoring and video conferencing, where the advantages of flat-surface mounted boundary microphones can be utilised.

Picture shows the product in black for illustration only.

The C200 is available with and without ON/OFF switching and is phantom powered from 24 - 48v dc. An integral LED indicates connection.

The rugged microphone housing is vibration isolated from the mounting surface by a soft neoprene moulding. Interface connection is via a miniature XLR wired to a 4.5metre cable terminated with a male XLR.

Boundary microphones offer many benefits over more conventional types, providing good omni-directional pick up. One of the most noteworthy features of the boundary microphone is its ‘reach’. In the near field, the output falls as distance from the source increases, in a similar manner to a conventional microphone, but in the ‘free field’ beyond, where there is normally a 6dB drop for a doubling of distance, the microphone output barely changes.

Boundary microphones can be directly mounted on most non-resonant, smooth, non-sound absorbent, surfaces to provide the benefits described. In enclosed environments, the chosen surface on which the microphone is to be mounted should also take note of loudspeaker proximity, to avoid acoustic feedback.

Specification

Transducer Type Electret
Polar Pattern Semi-Cardioid
Frequency Response 50Hz to 18KHz ± 3dB
Sensitivity -35 ± 3dB at 1KHz, at 75dB SPL.
MAX SPL @ 1% DISTORTION 130dB
Impedance 600 ohm nominal
Phantom Powering 24-48v
Maximum SPL 130dB (1%THD, open circuit)
Current Required Less than 5.0mA over operating voltage range
Operating Voltage 9 ~ 52V DC (Phantom)

Please note The C200 is available with and without ON/OFF switching.

Order codes: C200: Without ON/OFF switch
C200/PTT: With ON/OFF switch

Communication Technology C200/PTTmic in white

Pages Updated: Tuesday 22 July 2008

FREE AV Guide - Click to download

How to order from Independent Products

Payment options: bank transfer, cheque, debit card, credit card, 14 and 30 day credit accounts (see below). We do not charge a credit card surcharge.

Independent Products only deliver to the UK mainland. To place an order then please fax your purchase order to 01754 898910, including your invoice/delivery address, goods, delivery charge, total including VAT and method of payment. We are unable to take telephone orders.

If you are an educational establishment, government establishment, large registered charity or blue chip company and wish to pay by 14 or 30 day account please fax your official purchase order.

Please note that Independent Products only supply equipment to businesses, government bodies, educational establishments and charities. We never sell to private individuals.

Please do not book installation of equipment before goods have arrived and have been fully tested. We accept no liability for installation or other cost occurred in the case of late delivery. Courier delays, manufacturer supply problems, etc, are beyond our responsible control.

E. & O.E. www.independentproducts.co.uk

Independent Products Ltd | 10 Burgh Road | Skegness | Lincolnshire | PE25 2RA

Tel 01754 898900 | Fax 01754 898910 | Email